Post by Karl on Sept 18, 2017 8:09:26 GMT -5
Peek Injection molds must be particularly intended to run high-temp materials with the draft, complete, undermines. The resin additionally should be extremely dry to process well and accomplish the coveted end properties. This implies the resin must be at 0.02% dampness or below.
Above all, safety is always the first concern. At the time of Peek Injection molding, well-being ought to be an essential thought. Wear safety glasses or a face shield, Kevlar or stainless steel sleeves, and substantial cotton gloves when cleaning and venturing into the shape. Or else, you may face some major problems due to lack of negligence.
Contact Information
MING-LI PRECISION STEEL MOLDS CO., LTD.
No. 13,36 Rd., Taichung Industrial Park, Taichung 407, Taiwan R.O.C. 407648
Tel: +886-4-2359-9288
Fax: +886-4-2359-9299
Mail: marketing@mingli-molds.com.tw
Mail: karl@mingli-molds.com.tw
www.moulds.asia/products/peek-injection/
Above all, safety is always the first concern. At the time of Peek Injection molding, well-being ought to be an essential thought. Wear safety glasses or a face shield, Kevlar or stainless steel sleeves, and substantial cotton gloves when cleaning and venturing into the shape. Or else, you may face some major problems due to lack of negligence.
Contact Information
MING-LI PRECISION STEEL MOLDS CO., LTD.
No. 13,36 Rd., Taichung Industrial Park, Taichung 407, Taiwan R.O.C. 407648
Tel: +886-4-2359-9288
Fax: +886-4-2359-9299
Mail: marketing@mingli-molds.com.tw
Mail: karl@mingli-molds.com.tw
www.moulds.asia/products/peek-injection/