Get to Know about the MPO and MPT Cables in Details

[fibermart]

In high-density cabling environments like data centers, MTP or MPO breakout cable is widely used. Traditional, by a skilled technician, the tight-buffered multi-fiber cable must have each fiber terminated individually. MPO cable comes pre-terminated and carries multiple fibers. Either 12 fiber or 24 fiber array is present in Factory terminated MPO / MTP connectors as you know. People interchangeably use the terms MTP and MPO and the difference between the two must be clear for the customers. Optical signals with different wavelengths are separated again after being combined and transmitted together in this technique. To transmit data in several (or even many) channels with slightly different wavelengths, it is mostly used for optical fiber communications. MTP is a registered trademark of an MPO connector manufactured while MPO is a fiber connector type. All MPOs are not MTPs but All MTPs are MPOs. MPO is Multi-Fiber Push On. To terminate multi-fiber ribbon connections, this connector is commonly used in indoor environments.

Contact Us

FiberMart Company, Inc.

212 West Lone Cactus Dr., Phoenix, Arizona 85027, USA

Tel : [phone]

Fax: [phone]

E-mail: [e-mail]

China (Manufacturing R & D)

Mingyuan Road, Optic Valley, Hongshan Distric, Wuhan 430074, Hubei Province, P.R. China

Tel : [phone] [phone]

Fax: [phone]

E-mail: [e-mail]

www.fiber-mart.com/mtpmpo-fiber-cable-mtplc-breakout-cable-c-112_635_891.html